Hayterette
CODE
005C
OWNER'S HANDBOOK
(English Version)
FROM SERIAL NO: 005C001001
ISSUE 21.02.05
HANDBOOK: 005155 (REV .0.)
1ST Year (12 months)
1ST Year (12 months)
Owner’s Name:
We certify that this service has been
carried out by an Authorised Hayter
Service Dealer
Serial Number:
Date:
Date:
Note for dealer: Please retain this voucher for your records.
2nd Year (24 months)
2nd Year (24 months)
Owner’s Name:
Serial Number:
We certify that this service has been
carried out by an Authorised Hayter
Service Dealer
Date:
Date:
Note for dealer: Please retain this voucher for your records.
CONTENTS
1.2 Main Features/Specifications
1.5 Contents
1.20 Maintenance Schedule
1.21 - 1.26 Mower Maintenance
1.21
1.21
1.21
1.22
1.22
1.23
1.23
1.24
1.24
1.24
1.24
1.25
1.25
1.26
- Engine
1.6 Introduction
- Throttle Cable Adjustment
- Carburettor Adjustments
- Oil Service
- Air Cleaner Service
- Spark Plug Service
- Keeping Engine Clean
- Deck Housing
- Securing Nuts and Bolts
- Control Cable
- Lubrication
- Cutterblade Removal
- Cutterblade Assembly
- Storage
1.7 Warranty
1.8 - 1.11 Safety Precautions
1.11 Safety Symbols
1.11 Decal Symbols
1.12 Assembling the Mower
1.12
1.12
1.12
- Delivery Checklist
- Handlebar
- Engine Start Grip
1.13 Before Starting the Engine
1.13
1.13
1.13
1.13
- Prevent Engine Damage
- Oil Type
- Check Oil Level
- Fuel Type
1.27 - 1.28 Trouble Shooting
1.29 Declaration of Conformity
1.30 - 1.31 Parts List
1.14 - 1.17 Operating The Mower
1.14
1.14
1.14
1.14
- Controls
- Starting Step 1
1.32 Parts list Diagram
1.34. - 1.35 Notes
-
-
Step 2
Step 3
1.15
1.15
1.15
1.15
1.16
1.16
1.17
1.17
- Travel
- Turning
- Stopping
- Slopes
- Height of Cut
- Before Mowing
- Heavy Growth
- Cutterblade Operation
- Non-Grassed Areas
- Lawn Care Calendar - Guide Only
- Lawn Stripes
1.36 Customer Info
1.17
1.18 - 1.19
1.19
1.5
INTRODUCTION
Thank you for purchasing a Hayter mower. The following pages are designed to help you gain
safe and efficient service from your mower.
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives
essential information regarding mower safety, operation, maintenance and specifications. Read
and understand this handbook prior to operating your mower for the first time. Make sure you
are familiar with all the controls and points of regular maintenance. If you have any doubts,
consult your local Hayter authorised dealer who will be pleased to give you assistance.
IMPORTANT: This mower is designed solely for use in a domestic grass cutting
environment. Use in any other way is considered as contrary to the intended use. Compliance
with and strict adherence to the conditions of operation, service and repair as specified in this
handbook also constitute essential elements of the intended use.
This mower should be operated, serviced and repaired only by persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed in this handbook and all other generally recognised regulations on
safety must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve Hayter Limited of
liability for any resulting damage or injury.
Hayter mowers are robustly constructed and designed for efficient economical
performance under normal mowing conditions. Correct operation and maintenance will ensure
a long and satisfactory service life. Prior to despatch from our factory every effort is made to
ensure that your mower is delivered in perfect condition.
Throughout this handbook all references to left and right are as viewed from behind the han-
dlebar, in the direction of forward travel.
This handbook is based on information available at the time of publication.
HAYTER LIMITED reserve the right to amend product specifications without prior notification.
1.6
WARRANTY
LIMITED WARRANTY
Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects
in material and workmanship under normal use and service for a period of three years from the
date of purchase. The manufacturer of major proprietry components ie. engines, gearbox /
transaxle (where applicable) furnish their own warranty and services are provided through their
authorised network. To qualify for the full benefit of the warranty, the warranty registration card
must be returned within 14 days of purchase. Subject to the conditions and exclusions noted in
this limited warranty, we shall at our option, repair or replace any warranted part during the
applicable period. If you are in doubt or experience any difficulty, please consult a Hayter
Authorised Service Dealer for clarification.
To qualify for the extended warranty (second and third year) of the three year limited warranty
the machine must have annual services carried out by an Authorised Hayter Service Dealer.
These chargeable services should be carried out within 12 and 24 months of the date of purchase.
Excluded from the extended warranty period are those items which are subject to normal wear
and tear e.g. tyres, wheels, cutterblades, belts, cables, grassbags, brush/bristles, batteries and
other consumable wearing parts.
All consumer machines which are fitted with a genuine Hayter friction disc as original
equipment before use, are covered by a Lifetime Warranty against the engine crankshaft
bending. Note: friction washers, blade brake clutch (B.B.C) units and other such devices are not
applicable. Only machines fitted with a genuine Hayter friction disc, which are used in
accordance with the recommended operating and maintenance procedures, are covered.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused or
used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does
not cover minor mechanical adjustments unless they are due to defective material or
workmanship. Consult the Owner’s Handbook or a Hayter Authorised Service Dealer for
assistance when making these adjustments.
A warranty period of 90 days applies to machines used for commercial purposes.
To make a warranty claim, return the unit to a Hayter authorised dealer along with proof of
purchase stating the machine serial number and date of purchase. The service receipt(s) or this
Owners Handbook with the 1st/2nd year service boxes fully completed, must be produced as
proof of entitlement to the extended warranty period. Subject to the conditions and exclusions in
this limited warranty, the authorised dealer will, at our option, repair or replace any warranted
part within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to
which you may be entitled and your statutory rights are not affected by this warranty. If you need
additional information concerning this written warranty, or assistance in obtaining services,
please write to : HAYTER LIMITED, Service Department, Spellbrook, Bishop’s Stortford,
Hertfordshire CM23 4BU
UK ONLY: Details of your local Hayter authorised dealer are contained in Yellow Pages and
1.7
SAFETY PRECAUTIONS
Safety Alert Symbol
This safety alert symbol indicates important safety messages. When
you see this symbol be alert to the possibility of injury. Carefully read
the following and inform others.
Your mower is perfectly safe if used correctly. Failure to observe the
following precautions may result in serious injury.
Training
Before using the mower read the owners handbook carefully. Pay par-
ticular attention to the safety precautions. Ensure that you are familiar
with the controls and the proper use of the equipment. Learn how to
stop the mower quickly in an emergency.
Never allow children or people unfamiliar with these instructions to
use the mower.
Never mow while people, especially children, or pets are nearby.
Keep in mind that the user is responsible for accidents or hazards
occurring to other people or their property.
Preparation
While mowing, always wear substantial footwear and long trousers.
Do not operate the equipment when barefoot or wearing sandals.
Thoroughly inspect the area where the mower is to be used and remove
all objects which may be thrown by the machine.
WARNING: Petrol is highly flammable.
- Store fuel in containers specifically designed for this purpose.
- Add fuel before starting the engine. Never remove the cap from the
fuel tank or add petrol while the engine is running or when the engine
is hot. Allow the engine to cool for at least two minutes before refu-
elling.
- Do not attempt to start the engine if petrol is spilled or a smell of
petrol is present. Move the mower away from the area of spillage
and avoid creating any source of ignition until petrol vapours have
dissipated.
1.8
SAFETY PRECAUTIONS
Preparation
- Always use fresh fuel. Stale fuel can block the carburettor and cause
leakage.
- Replace fuel tank and oil tank caps securely.
A damaged cutterblade or loose fixing bolt are major hazards. Before
use, always visually inspect the cutting mechanism to ensure that it is
in good condition. A damaged cutterblade must be replaced immedi-
ately with a genuine Hayter replacement part
Operation
Do not operate the engine in a confined space where exhaust fumes
(carbon monoxide) can collect. Refuel outdoors only and do not smoke
while refuelling.
Always pull the starter cord slowly until resistance is felt. Then pull
the cord rapidly to avoid kickback and prevent hand or arm injury.
Mow only in daylight or good artificial light.
Avoid using the mower on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Mow across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not mow excessively steep slopes of more than 20 degrees.
Use extreme caution when reversing or pulling the mower towards you.
Stop the engine before moving the mower across areas other than grass.
Never operate the mower unless the guards are securely in position and
in good condition.
Do not change the engine governor settings or overspeed the engine.
Disengage the rear roller drive clutch before starting the engine.
Start the engine carefully, with feet well away from the cutterblade.
1.9
SAFETY PRECAUTIONS
Operation
Do not tilt the mower when starting the engine.
Do not put hands or feet near or under rotating parts.
Never pick up or carry the mower while the engine is running.
Never lift the rear deflector while the engine is running.
Never touch the exhaust/exhaust guard or cooling fins when the engine
is hot.
Stop the engine and disconnect the spark plug lead:
- Before clearing blockages or unclogging the discharge chute.
- Before cleaning/checking or working on the mower.
- After striking a foreign object. Inspect the mower for damage and
ensure necessary repairs are made before re-starting.
- If the mower starts to vibrate abnormally (check immediately).
Stop the engine:
- Whenever you leave the mower.
- Before refuelling.
- Reduce throttle control setting during engine shutdown.
Maintenance & Storage
Keep all nuts, bolts and screws tight to ensure that the equipment is in
safe operating condition.
Frequently check fuel lines and fittings for cracks or leaks and replace
if necessary.
Never check for a spark when the spark plug is removed. (Use approved
tester)
Inspect the exhaust periodically and replace if worn or leaking.
Never crank the engine with the spark plug removed.
Never start the engine with the air-cleaner or air-cleaner cover
removed.
Never store the mower with petrol in the tank within an enclosed area
where fumes may reach an open flame or spark.
1.10
SAFETY PRECAUTIONS
Maintenance & Storage
Allow the engine to cool before storing in any enclosure. To reduce the
fire hazard, keep the engine and the surrounding deck area free of
grass, leaves, or excessive grease.
Check the rear deflector and grassbag frequently for wear or deterioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done outdoors and
when the engine is cool.
Wear strong work gloves when removing and reassembling the cut-
terblade.
Always replace worn or faulty parts with genuine Hayter parts.
Safety Symbols
Danger of being hit by thrown
objects.
Safety Alert - Be aware to the
possibility of injury.
Danger of severing toes or fin-
gers in cutting mechanism.
Carefully read the Owners
Handbook before using the
machine.
Stop engine and remove spark
plug lead before working on
the mower.
Keep bystanders at a safe
distance from the mower.
Decal Symbols
Engine Stop (Symbol)
Height of Cut Adjustment (Symbol)
Throttle Control (Symbols)
Slow
Fast
STOP
305113
CS198
Choke
1.11
ASSEMBLING THE MOWER
Delivery Checklist
Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Engine Handbook.
Handlebar
Unscrew the handlebar securing knobs sufficiently to allow the handle-
bar to pivot. Move the engine stop lever away from the engine to avoid
damage and unfold the handlebar to the operating position. Make sure
the knobs are assembled to the outside of the handlebar and tighten to
secure in position.
CS152
Take care to ensure that the control cables do not become snagged at
the pivot point.
Engine Start Grip
1
2
Operate the engine stop lever towards the handlebar and very slowly
pull the engine start grip (1) away from the engine until there is suffi-
cient slack in the rope to enable it to be threaded into the rope guide
(2). Release the start-grip until it rests against the rope guide as
shown. Finally tighten the nut (3) to secure the rope guide.
3
1.12
MOWER
BEFORE STARTING THE
Prevent Engine Damage
To prevent engine damage the engine is shipped without oil or
petrol. The engine must be filled with the correct grade of oil and
petrol before starting the engine.
Oil Type
Always use high quality detergent oil classified “For service SE, SF,
SG” SAE 30 oil. Never use additives with recommended oils.
SAE 10W-30 multigrade oil may be used, but this will result in higher
engine operating temperatures with consequential high oil consump-
tion. It is imperative that the oil level is checked more frequently if this
grade of oil is used in order to guard against serious engine damage.
To prolong the life of your engine it is important that the oil is changed
after the first 5 hours of use - refer to ‘Maintenance Schedule’.
Check Oil Level
0.15
Litres
Clean around the oil filler cap before removing. With the mower on a
level surface, unscrew and remove the oil filler - dipstick. Wipe oil
from it with a clean cloth. Screw the oil filler - dipstick back in place,
then unscrew and remove it to check the oil level.
The oil level is correct when it is at the full mark on the dipstick.
DO NOT OVERFILL.
V15C
Fuel Type
Always use clean, fresh unleaded petrol. Purchase fuel in quantities
that can be used within 30 days. Never mix oil with petrol. For added
engine protection Briggs & Stratton recommend the use of their fuel
additive which is available from an authorised Briggs & Stratton serv-
ice dealer.
Fill to base of neck to allow for fuel expansion. Do not overfill the
fuel tank.
1.13
OPERATING THE MOWER
Controls
Operate all control levers several times and ensure that the cables
move freely. Check that the engine stop lever returns freely to it’s rest
position when released.
Whilst operating the engine throttle mechanism slight resistance
should be felt when moving the lever to the ‘choke’
position.
Starting - Step 1
Move the throttle control lever to the ‘choke’
position before start-
ing a cold engine. Move the throttle control lever to the ‘fast’
position before starting a warm engine.
CS177
Step 2
Stand behind the mower and hold the handlebar together with the
engine stop lever with your left hand. With your right hand hold the
engine start - grip and pull slowly until resistance is felt, then pull rap-
idly to crank the engine. Carefully return the start grip to the storage
position when the engine starts.
If the engine does not start after 5 attempts - refer to “Trouble
Shooting”.
The engine stop lever must be held firmly against the handlebar to
start and keep the engine running. If the engine stop lever is
released the engine will stop.
Step 3
Allow the engine to warm up and move the throttle lever to the
‘fast’ position after starting a cold engine.
To prevent damage never pull the engine start grip when the
engine is running.
CS181
1.14
OPERATING THE MOWER
Travel
Forward travel: Hold and push against the handlebar with both hands
to move the mower forwards.
Reverse travel: Hold and pull against the handlebar with both hands
to reverse the mower towards you.
Turning
To make a wide turn steer the mower with the handlebar in the direc-
tion required.
To make a tight turn apply downward pressure on the handlebar to
raise the front wheels just above ground level and steer in the required
direction.
To prevent accidents do not raise the front of the mower exces-
sively when making a turn. Never raise the rear of the mower
when the engine is running.
Stopping
Release the engine stop lever and ground drive clutch lever on auto drive
models and push the throttle control lever to the ‘slow’ position.
If the engine fails to stop, move the throttle lever to the ‘slow’ posi-
tion and disconnect the spark plug lead.
STOP
Slopes
To prevent engine damage do not use the mower on slopes greater
than 20 degrees.
1.15
OPERATING THE MOWER
Height of Cut
Move the height of cut lever sideways to disengage it from the locking
notch, then push forwards to lower or pull backwards to raise the height
of cut. Release the lever in the required position and ensure that it locks
firmly into one of the seven notch settings.
Always select a height of cut to suit operating conditions. Prevent
engine overloading and blockages by avoiding low cuts in long grass
conditions. Be prepared to make two cuts when the grass is long.
CS287
30513
Before Mowing
To prevent accidents thoroughly inspect the area and remove all
objects which when contacted by the mower cutterblade could
become dangerous projectiles. Inspect the area for hidden obstruc-
tions which when contacted by the cutterblade could risk health
and safety. Remember the location of these obstructions and
ensure that you mow around them.
1.16
OPERATING THE MOWER
Heavy Growth
Areas of heavy growth should be mown without collecting the clip-
pings. If collection is required, first mow the area without the grass-
bag at the maximum height of cut setting. Allow the grass clippings to
dry out and then mow the area at the maximum height of cut setting
with the grassbag fitted. Reduce the height of cut and mow the area
again as necessary until the required finish is obtained.
30513
To prevent grass damage do not remove more than one third of grass
height in one cut.
Cutterblade Operation
Hayter balanced ‘C’ type cranked cutterblades are fitted to this
machine. They are designed to swing on the shoulder of the
Cutterblade bolt when encountering a fixed object. Keep cutterblades
sharp and ensure they are secured correctly.
CS126
Non-Grassed Areas
When moving the mower across non-grassed areas, stop the engine
and set the mower to the maximum height of cut to protect the cutting
mechanism.
STOP
1.17
LAWN CARE CALENDAR
To be used as a guide only.
January
There is very little work to do this month apart from brushing away
leaves. Keep off the grass if frozen or waterlogged.
February
Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil
organisms and root growth and apply lawn sand if necessary.
March
The yearly lawn work programme really starts this month. As soon as
the ground conditions are suitable, the first cut can be made. The first
cut should merely “top” the grass as close cutting at this stage could
result in severe yellowing or browning. Two cuts are generally suffi-
cient this month.
April
Mow often enough to stop grass growing away. Dig out patches of
coarse grass or resistant weed. Re-seed bare patches.
May
Keep mowing increasing the frequency as required. Treat with selec-
tive weed killers or combined weed/feed preparations if you did not
feed the lawn in April.
June
Summer mowing should now be under way. It should be necessary to
mow the lawn twice a week. Raking before mowing is important this
month as the combined action keeps runners of clover under control.
Water the grass if necessary, and remember to soak thoroughly.
July
Treat the grass with the second application of fertiliser or weed
killer/fertiliser. Water when necessary and rake occasionally. As a gen-
eral rule the grass clippings should be removed each time you mow. If
weather conditions are dry and hot and the grass is weed free, leave the
clippings on the lawn to help maintain ground moisture.
1.18
LAWN CARE CALENDAR
August
Keep mowing regularly and watering as necessary. Fill any cracks
caused by drought with a mixture of sharp sand and soil. In dry weath-
er conditions leave the grass longer to help retain ground moisture.
September
Raise the height of cut to allow the grass to thicken and protect the
roots from the winter frost and snow.
October
Rake out the thatch from the turf and spike the lawn to assist in
drainage. Brush in peat and sharp sand.
November
Use a stiff broom to disperse worm casts before mowing. Keep turf
free from leaves.
December
Apart from brushing away leaves, December is a slack end of a busy
year. Keep off the lawn if it is very wet or frozen.
Lawn Stripes
1
The way to achieve a neat striped effect is for the lawn being cut in
parallel stripes, alternate stripes being mown in opposite directions. A
much more important routine is to cut at right angles to the line of the
previous mowing. If the work has been carried in a north-south line,
then the next cutting should be in an east-west direction. The cross-
cutting keeps down the coarse weed grasses.
2
1CG480V05A
To prevent grass damage do not remove more than one third of the
grass height in one cut.
1.19
MAINTENANCE SCHEDULE
To prevent accidents stop the engine disconnect the spark plug
lead before attempting to carry out maintenance procedures on
the mower.
Follow the hourly or calendar intervals, whichever occurs first. More
frequent service will be required if working for prolonged periods
under dusty, dry conditions, or when airborne debris is present or after
extensive operation cutting tall, dry grass.
First 5Hrs
After the very first five hours change the engine oil
Daily
Check the oil level
Remove grass debris from around the engine, exhaust/exhaust guard and
air ways in the top cowl and underside of the deck housing.
Check the condition of guards and safety devices.
Check condition of cutterblades.
25Hrs or Every Season
Change the engine oil if continuously operating under heavy load or
high ambient temperature.
Service the air cleaner.
Lubricate wheels, pivot points and linkages and grease the inner con-
trol cables at point of entry and exit from their outer casing.
Sharpen the cutterblade.
50Hrs or Every Season
Change the engine oil.
50Hrs or Every Season
Clean the engine cooling system. Clean more often under dusty condi-
tions or when airborne debris is present or after prolonged operation
whilst cutting tall, dry grass.
Replace the spark plug.
1.20
MOWER MAINTENANCE
To prevent accidents stop the engine and disconnect the spark plug
lead before attempting to carry out maintenance procedures on
the mower.
Engine
7
1. Finger Guard
2. Carburettor
8
1
3. Spark Plug / Lead
4. Exhaust Guard
5. Exhaust
6
9
6. Oil filler Cap/ Dipstick
7. Start Grip
8. Fuel Cap
3D319R08
10. Air Cleaner
2
5
3
4
Throttle Cable Adjustment
2
Loosen the outer cable clamp screw (1) and move the governor control
lever (2) to the left as far as possible. Insert a large, flat blade screw
driver (3) into the slot in the engine control bracket (4) at the angle
shown. Push the governor control lever to the right until it just touch-
es the screw driver blade. Move the throttle control lever to the ‘fast’
position (not the ‘choke’ position) and re-tighten the outer cable clamp
screw. Replace the engine cowl.
3
1
4
Carburettor Adjustments
Should only be made by an authorised Briggs & Stratton dealer. Under
no circumstances should the engine be adjusted to run at a speed in
excess of that shown on the Declaration of Conformity.
1.21
MAINTENANCE
Oil Service
MOWER
Check the oil level daily before starting the engine and ensure that the
correct oil level is maintained. Refer to-‘Before Starting the Mower’
for oil checking and filling instructions.
Change the engine oil after the first 5 hours of operation and thereafter
according to the ‘Maintenance Schedule’:-
1. Drain fuel by running the engine until the fuel tank is empty.
2. Remove the spark plug lead.
3. Allow the engine to cool.
4. Drain the oil while the engine is warm.(Not hot)
5. Tip the mower over on to its left hand side thus ensuring that
the air cleaner is kept uppermost to prevent engine damage.
6. Remove the oil filler dipstick and drain the oil into a suitable
container.
7. Refill with new oil of the recommended SAE viscosity grade.
(Refer to-‘Before Starting the Mower’)
Air Cleaner Service
3
1
To service the air cleaner, loosen screw (1) and remove cover (2).
Remove cartridge (3) and clean by tapping gently on a flat surface. If
very dirty, replace.
4
2
- Do not use petroleum solvents.
- Do not use pressurised air.
- Do not oil the cartridge.
After servicing, install the cartridge into the cover. Insert the tabs on
the bottom of the cover into the slots in the bottom of the base (4). Tilt
the cover upwards and securely tighten the screw to the base.
1.22
MOWER MAINTENANCE
Spark Plug Service
Use only Briggs & Stratton spark tester (1) to check for a spark as
shown in the diagram.
Replace the spark plug every 100 hours or every season, whichever
occurs first. A spark plug wrench is available from any authorised
Briggs & Stratton service dealer.
1
Check the spark plug gap with a feeler gauge and set at 0.76mm.
Keeping Engine Clean
Remove all grass and debris from the engine including the
exhaust/exhaust guard, the air ways in the top cowl and the surround-
ing deck areas on a daily basis after use. Never spray the engine with
water during cleaning. Water can contaminate the fuel. Always clean
with a brush or compressed air.
Grass and debris may clog the engine’s air cooling system especially
after prolonged operation while cutting tall, dry grass. The internal cool-
ing fins and surfaces may require cleaning to prevent overheating and
engine damage. We recommended that this service be carried out by an
authorised Briggs and Stratton dealer.
1.23
MAINTENANCE
Deck Housing
MOWER
Remove grass debris from the top and underside of the deck housing
immediately after use.
To prevent accidents fertilisers and top dressings are particularly
corrosive. Thoroughly clean the mower deck immediately after use
on treated grass and store well away from corrosive materials.
Securing Nuts & Bolts
Regularly check that all securing nuts and bolts are tight. Replace
missing or damaged items immediately.
1CG480V36B
Control Cables
Apply a good quality medium grease to the inner control cables every
25 operating hours at the point of entry and exit from their outer cas-
ings.
IMPORTANT: ALWAYS replace damaged cables.
Lubrication
Lubricate the wheels, pivot points and linkages with engine oil every 25
operating hours.
Apply a good quality medium grease to the inner control cables at the
point of entry and exit from their outer casing.
1.24
MOWER MAINTENANCE
Cutterblade Removal
WARNING - PREVENT ACCIDENTS: Never work on the cut-
terblades unless the spark plug lead has been removed. The cut-
terblades have sharp edges. ALWAYS wear strong gloves to pro-
tect your hands when working on the cutterblades. DO NOT rotate
tools towards the cutting edges to avoid the risk of injury should
the tool slip. ALWAYS use genuine Hayter replacement parts.
A
A
A
A
B
The condition of the cutterblades and the mounting arrangement
should be checked regularly for signs of wear or damage. Ensure
that the cutterblades are not bent or cracked.
Regularly check that the bolts securing the cutterblades and fric-
tion disc are secure.
A - Cutterblade bolt torque setting 19Nm (14lbs.ft).
B - Bottom plate bolt torque setting 54Nm (40lbs.ft).
A damaged cutterblade will cause the cutting mechanism to be out
of balance and excessive vibration will occur which may lead to
breakage. DO NOT use unbalanced cutterblades.
Replace the cutterblades every 2 years or sooner if excessively
worn or damaged.
Run the engine until the fuel tank is empty. Remove the spark plug
lead and allow the engine to cool. Turn the mower on its left hand side
and ensure that the air cleaner side of the engine is uppermost.
Remove the cutterblade nuts and bolts to remove the four cutterblades.
WARNING- PREVENT ACCIDENTS: ALWAYS renew all four
cutterblades to ensure the cutting mechanism is balanced, NEVER
replace cutterblades individually. ALWAYS use new bolts, nuts
and washers when fitting new cutterblades.
CS288
Cutterblade Assembly
Item No. Description Part No. QTY
Assemble the cutterblades such that they are below and pointing away
from the bottom plate. Tighten the cutterblade nuts and bolts to a
torque of 19 Nm.
1
2
Blade
Bolt
Washer
Nut
2779
590
1 Kit
1 Kit
}
1
2
1.25
MAINTENANCE
Storage
MOWER
To store the handlebar unscrew the 2 small securing knobs sufficient-
ly to allow it to be pivoted forwards to rest against the mower. Take
care to ensure that the control cables do not become snagged at the
pivot point and depress the engine stop lever to prevent it being dam-
aged through contact with the engine spark plug.
Engines stored in excess of 30 days need to be protected with Briggs &
Stratton fuel additive or drained of fuel to prevent gum from forming in
the fuel system or on essential carburettor parts. To ensure your mower
is maintained in good working order it is important that the following
procedure is adopted. Refer to the Maintenance section as necessary.
Drain fuel from the engine by operating the engine until it stops.
Disconnect the spark plug lead.
Change the engine oil.
Remove the engine spark plug and pour 15ml of engine oil into the
engine cylinder and replace the spark plug. Do not exceed the stated
volume of oil as engine damage may occur on re-starting. Do not
replace the spark plug lead. Slowly pull the engine start - grip once
to crank the engine. This will distribute the oil and help prevent engine
corrosion.
Clean grass and debris from the engine cylinder, cylinder head cooling
fins, under top cowl, and around and behind exhaust/exhaust guard.
Clean all other areas of the mower and ensure that the grassbag is clean.
Lubricate the mower.
Treat metal parts with a water repellent anti-corrosion product.
Cover the mower with a protective sheet and store it in a dry, ventilat-
ed area.
1.26
TROUBLE SHOOTING
PROBLEM
POSSIBLE FAULT
REMEDY
Engine will not turn over
Engine stop lever released
Incorrect oil level
Operate the engine stop lever
Check oil level
Obstruction under deck
Remove obstruction
Engine smokes
Excess oil level
Check oil level
Air cleaner plugged
Service air cleaner
Engine runs then stops
Fuel starvation
Fill fuel tank
Fuel cap vent blocked
Clean fuel cap vent
Engine will not start
Engine under load
Raise height of cut
Fill fuel tank
Fuel starvation
Incorrect/contaminated fuel
Drain fuel tank and fill with
correct fuel
Spark plug lead disconnected
Engine cold
Connect spark plug lead
Set throttle to ‘choke’ position
Operate engine stop lever.
Clean and adjust gap or replace
Engine brake not released
Faulty spark plug
Engine runs rough
Spark plug lead becoming
disconnected in use
Connect spark plug lead
Faulty spark plug
Clean and adjust gap or replace
Service air cleaner
Air cleaner blocked
Incorrect/contaminated fuel
Drain fuel tank and fill with
correct fuel
1.27
TROUBLE SHOOTING
PROBLEM
POSSIBLE FAULT
REMEDY
Engine vibrates excessively
Mounting bolts loose
Tighten bolts
Cutterblade bolt loose
Cutterblades out of balance
Engine crankshaft bent
Tighten bolt
Replace cutterblades
Consult your dealer
Uneven cut
Undulating ground conditions
Cutterblades worn
Change direction of travel
Renew cutterblades
Cutterblades out of balance
Wheels damaged
Renew cutterblades
Inspect and replace as necessary
Mower is hard to push
Cut height too low
Wheels damaged
Increase cut height
Inspect and lubricate or replace
as necessary
1.28
DECLARATION OF CONFORMITY
EC DECLARATION OF CONFORMITY
HAYTER LIMITED,
Spellbrook, Bishop’s Stortford, Herts CM23 4BU ENGLAND
declare that the lawnmower:
Models:
Hayterette
CODE 005C
Push
Pedestrian Rotary
Briggs & Stratton
3000 rpm
Machine Type No.
Category:
Type:
Engine manufacturer:
Speed of rotation:
Width of cutting device:
457 mm
Speed of rotation of the cutting device: 3000 rpm
Complies with the provisions of Directive: 98/37/EC Essential Health & Safety Requirements Relating to the
Design & Construction of Machinery and Safety Components, as amended and the regulations transposed into
national law.
Also Directive 89/336/EEC Electromagnetic Compatibility, as amended and the regulations transposed into
national law.
Also Directive 2000/14/EC Noise emission in the environment by equipment for use outdoors, and the regula-
tions transposed into national law procedure applied for the conformity assessment: ANNEX VI, procedure 1.
Notified Body: Sound Research Laboratories Ltd. Holbrook House, Little Waldingfield,
Sudbury, Suffolk, ENGLAND
Notified body identification No: 1088
Measured sound power level:
Guaranteed sound power level:
98 dB(A)
96 dB(A)
Authorised Signatory:
Signed
Date: 26.11.04
Declaration done and Technical Documentation kept at:
HAYTER LIMITED,
Spellbrook, Bishop’s Stortford,
Herts CM23 4BU ENGLAND
S.A. Maryniak
(Technical Director)
VIBRATION INFORMATION
The Lawnmower Vibration level at the operator contact position, measured in accordance with Euopean
Standard EN836-Handlebars. CODE 005C = 7.5 ms-2
1.29
PARTS LIST
NO. DESCRIPTION
PART NO. QTY ITEM NOTE
1
2
3
4
5
6
7
8
Pin - Pivot
340182
09688
340179
09687
410064
305145W
305093
005142
09358
005102
3966
226013
226024
005121W
005139W
09442
09475
09654
09472
09438
09266
410007
005146
005145
005119
254013
005097
6289
2
6
1
2
1
1
1
1
3
1
4
2
2
1
1
6
6
2
1
1
4
1
2
2
1
2
1
2
8
4
4
4
2
1
2
2
1
1
4
1
Washer - 19mm Nylon
Lever - Engine Stop
Screw - 6mm x 20
Decal - Grass Blade
Handlebar - Upper
Guide - Rope
Throttle Control & Cable
Screw - M5 x 35mm Taptite
Cable - Engine Brake
Tie - Cable
Handwheel - Triangular
Bolt - M8 x 45 Handlebar
Handlebar - Lower
Footguard
Nut - M8 Nyloc
Washer - M8 Plain
Bolt - M8 x 45
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Washer - M6 Plain
Nut - M6 Nyloc
5/16” x 5/8” O/D Washer
Engine Compliance
Bearing Block - Upper
Bearing Block - Lower
Axle - Rear Assembly
Pin - Spring
Flap - Rear
Grommet - Rubber
Bearing
Wheel - 8”
Nut - 1/2” UNF Nyloc
Pin - Split 1/2” x 3/32” Diameter
Connecting Rod
Axle - Front W/A L/H
Bolt - Axle Pivot
Spring - Disc
Cutterblades Bolt - Kit (set of 4)
Axle - Front W/A R/H
Bolt - M8 x 75
5221
005095
4486
09303
005135
005116
005129
4912
Inc item 29
590
Inc items 55,57 & 58
005115
09372
4884
Clip - Spring Handle Retaining
1.30
PARTS LIST
NO. DESCRIPTION
PART NO. QTY ITEM NOTE
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
Handle Grip - Black
Rivet
Hub Cap
4097
1
1
4
2
1
1
2
1
1
1
1
1
3
1
4
1
6
4
1
09320
219143
320048
09273
09114
09216
1662
410087
320006
219189
-
Plug - Tube
Washer - 3/8” Spring S/C
Screw - 3/8” UNF x 1” Long
Nut - 3/8” UNF Nyloc
Key - Woodruff
Decal - Hayter
Decal - Height of Cut
Decal - Caution
Decal - Serial No.
Screw 3/8” UNF x 1 1/2” Long
Deck
09349
005140V
6306
Cutterblade Bolt
Cutterblade ‘C’ Type (set of 4)
Plain Washer 3/8” x 1 1/4”
Nut - 3/8” UNF Nyloc
Bottom Plate
2779
02394
09215
2811
1.31
PARTS LIST
1
6
2
2
3
11
10
1
7
8
19
9
11
11
20
13
22
5
13
12
16
17
48
16
17
12
16
43
31
14
16
17
17
26
27
29
26
16
28
30
17
23
15
43
30
29
29
24
31
44
28
32
21
33
23
41
25
42
40
16
29
17
52
32
44
21
51
35
24
36
54
29
39
38
57
18
31
43
39
49
50
21
32
33
29
18
30
47
53
47
34
53
21
32
30
57
37
56
59
36
58
58
35
57
57
29
31
29
43
56
55
56
56
55
57
56
57
45
46
55
55
1C005A02B
1.32
NOTES
Notes:-
1.33
NOTES
Notes:-
1.34
NOTES
Notes:-
1.35
CUSTOMER INFORMATION
Serial No:
Engine Type:- 12F802-1325-01 Engine:- Briggs & Stratton Quantum XTS 50
Date of Sale:-
Your Local Dealer:-
1.36
|