COLOR
TELEVISION
LENARO 72 FLAT
MF 72-6510/8 IDTV
DEUTSCH
ENGLISH
____________________________________________
Information
Displaying digital station reception properties
Technical data
Service information for dealers
Environmental note
Troubleshooting
CONTENTS
36-39
36
37
37
37
38
39
Additional Information for units sold in the UK.
3
GENERAL INFORMATION
__________________
Special features of your digital receiver
This television can receive and process all analogue and all
unencrypted digital stations. This television set has an integrated
digital and analogue receiver. The digital receiver unit converts the
signals from digital stations to provide outstanding audio and
picture quality.
The TV guide (only for digital stations) tells you of any schedule
changes at short notice, and provides an overview of all the sta-
tions’ schedules for the next few days.
If the broadcaster provides it, you can call up detailed information
on each programme at the touch of a button.
This television has a very comprehensive, user-friendly menu system.
The menu is displayed on the television screen, and the functions of
the remote control buttons are explained.
Receiving digital stations
You need a digital outdoor or indoor antenna (passive or active
indoor antenna with its own power supply) to receive digital
stations.
Unlike analogue broadcasting, not every station has its own trans-
mission frequency. Instead, several stations are grouped into what
are known as bouquets on a regional or national level.
You can find the current transmission information on teletext from
various broadcasters, or look in a TV guide or on the Internet.
4
___________________________
SET-UP AND SAFETY
Please note the following information when setting up your television set.
10
cm
10
cm
20 cm
20
cm
This television set is designed to receive and display video and audio
signals.
Any other use is expressly prohibited.
The ideal viewing distance is 5 times the screen diagonal.
External light falling on the screen impairs picture quality.
Ensure sufficient clearance between the TV and the wall cabinet.
The television set is designed for use in dry rooms. If you do use it in the
open, please ensure that it is protected from moisture, such as rain or
splashing water. Do not expose the television set to any moisture.
Do not place any vessels such as vases on the television, as they may
spill liquid, thus presenting a safety risk.
Place the television set on a solid, level surface. Do not place any
objects such as newspapers on the television set or cloth or similar items
beneath it.
Golf
am
g
K
Do not place the television set close to heating units or in direct sunlight,
as this will impair cooling.
Heat build-up can be dangerous and shortens the operating life of the
television set. For reasons of safety, have a specialist remove any dirt
deposits in the set from time to time.
Keep the television set away from magnetic fields (loudspeaker boxes,
for example).
VICE !
! SER
Do not open the television set under any circumstances. Warranty
claims are excluded for damage resulting from improper handling.
Ensure that the mains cable is not damaged.
Thunderstorms are a danger to all electrical devices. Even if the tele-
vision set is switched off, it can be damaged by a lightning strike to the
mains or the antenna cable. Always disconnect the mains and antenna
plugs during a storm.
Clean the screen with a soft, damp cloth. Only use plain water.
Note:
Do not connect any other equipment while the device is switched on.
Switch off the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected the
external devices and the antenna.
5
__________
CONNECTION/PREPARATION
Connecting the antenna and the mains cable
TV
R
L
AV
AV
3
2
AUDIO
OUT
R
AV
1
1
2
1
2
Plug the cable of the outdoor or indoor antenna (passive or active
indoor antenna with its own power supply) into the antenna socket
»Ä« of the television set.
Note:
When connecting an indoor antenna you may have to try it out at
different positions until you get the best reception.
Plug the mains cable into the wall socket.
Note:
Only plug the device into the mains socket after you have
connected the external devices and the antenna.
Inserting batteries in the remote control
1
Open the battery compartment by removing the lid.
2
Insert the batteries (Mignon type, for example UM-3 or
AA, 2x1,5V).
Observe the polarity (marked on the base of the battery
compartment).
3
Close the battery compartment.
Note:
If the television no longer reacts properly to remote
control commands, the batteries may be flat. Be sure to
remove used batteries.
The manufacturer accepts no liability for damage re-
sulting from used batteries.
Environmental note
Batteries, including those which contain no heavy metal,
may not be disposed of with household waste. Please
dispose of used batteries in an environmentally sound
manner. Find out about the legal regulations which apply
in your area.
6
____________________________________________
OVERVIEW
The remote control
Ǽ
Switches off the television set (stand-by).
Switches between picture formats;
page stop in teletext mode.
E
PIP
TV-G
z
TV-G
0…9
Calls up the TV guide.
Switches the television on from stand-by mode.
Selects channels directly.
d
Sound on/off (mute).
Opens the »MAIN MENU« menu.
Zap function.
i
TXT
AV
P
Z
SCAN
S
PAT
P+, P-
Switch the television on from standby;
select stations step by step;
move the cursor in the menus up and down.
d
VCR
DVD
SAT
Ǹ Ƿ
Adjust the volume;
move the cursor left/right.
Tele Pilot 162 C
OK
Calls up the station list.
Activates various functions.
TXT
AV
Switches between teletext and TV modes.
Selects the AV channel positions and the most recently
watched television station;
switches to double character size in teletext mode.
SCAN
PAT
S
Selects the channel scan function.
Selects the Double Window function.
Selects sub-pages in teletext mode.
Subtitle on/off.
P
Updates the page in teletext mode.
7
____________________________________________
OVERVIEW
z
Selects various picture settings;
scrolls back a page in teletext mode.
Ȅ
Ƿ
F
Time on.
PIP
TV-G
z
Moves to the next page in teletext mode.
Freeze-frame
Selects the desired chapter in teletext mode
Selects various audio settings;
selects the desired topic in teletext mode
VCR, SAT Switches to operating a GRUNDIG video
DVD
recorder, a GRUNDIG satellite receiver or
a GRUNDIG DVD player.
TXT
AV
P
Keep the relevant buttons (»VCR«, »SAT«, »DVD«)
pressed down. Then press the button you require.
SCAN
S
PAT
d
Note:
VCR
DVD
SAT
The functions available to you depend on the model of
the device you are using.
Just try it out.
Tele Pilot 162 C
The front of the television set
Ȃ
Switches the television into and out of
standby mode
+ PR -
Channel selection
Switches the television on from stand-
by
Adjusts the volume
z -
+
S-VIDEO
Video signal input for S-video
camcorders
VIDEO IN
L AUDIO IN R
y
Video signal input for camcorder
Audio signal input for camcorder
PR
S
-V
ID
EO
Headphone jack (3.5 mm ø jack
plug)
VIDEO IN
L
AUDIO IN
R
8
SETTINGS
______________________________________________
Searching for television stations
The television is equipped with an automatic station search system.
You start the search and can then sort the television stations into
your order of preference.
There are 899 preset positions for digital stations and 100 for ana-
logue television stations, to which you can assign television stations
from the antenna or from the cable connection (analogue pro-
grammes).
Language
English
Deutsch
Francais
Italiano
Español
Portuguesa
Nederlands
Eλληvικα
Dansk
Svenska
Suomi
Türkçe
Polski
Pycckꢀꢁ
Magyar
Slovenãina
âe‰tina
1
2
Switch on the television with »
press »P+« on the remote control.
– The »Language« menu appears when the television is first
switched on.
Ȃ« on the television set, then
Norsk
Select
Hint:
If the »Language« menu does not appear on the screen, follow
the instructions on page 34 to retune all television channels
using the automatic search.
Select language with »P+«, »P-«, » « or » « and press
»OK« to confirm.
Ǹ
Ƿ
– The »Channel search - Digital« menu appears and the search
begins. The automatic search may last several minutes
depending on the number of television channels received.
– The search is finished when the message »Done« appears.
DVB Menu
Manual Search
3
4
Press »Ȅ« (green) to quit the station search.
Automatic Search
Reset receiver
Installation
– The »DVB Menu« appears.
Select »Installation« by pressing »P-« or »P+« and press
»OK« to confirm.
– The »Installation« menu appears.
Signal Information
Select
F
● Back
5
6
Select »Region« with »P-« or »P+«.
i
Exit
●
Select the country with » « or » «.
Ǹ
Ƿ
Finishing the settings
1
Press »i« to finish the settings.
Note:
If you can only receive analogue television stations, adjust the
settings as described in the chapter “Changing stored channels
for analogue stations” on page 32.
9
SETTINGS
______________________________________________
Changing stored channels for digital stations
You can change the order of preset stations as required, delete
stations you do not need, and block channel positions (parental
lock).
MAIN MENU
Sound
Picture
Preset list
Channel settings
Settings
Deleting channels
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
i
Exit
List
●
Select
2
Select »Preset list« with »P+« or »P-« and press »OK« to con-
firm.
– The menu »Edit channels - TV« appears.
Edit channels - TV
3
4
Select the channel you wish to delete with »P+« or »P-«.
1 Das Erste
2 ZDF
F
Press » « (blue) to prepare the channel for deletion and press
« (green) to delete.
3 SAT1
4 ZDF
»Ȅ
5 Doku/KiKa
6 Info/3sat
7 N24
8 ProSieben
9 arte
Sorting television channels
1
In the »Edit channels - TV« menu, select the channel to be
moved by pressing »P+« or »P-«.
1 2 3 4 Select Favourite
Ƿ
Ȅ
● TV
Select
i
● Move
F
● Delete
Ƿ
2
3
Highlight the channel with » « (yellow).
Exit
●
Select a new channel position by pressing »P+« or »P-« and
Ƿ
then press » « (yellow) to confirm.
– All of the channels that follow move up one position.
Note:
To sort the other television channels, repeat steps 1 to 3.
Stations that are assigned to fixed channels (stations with LCN
coding such as french stations) can not be moved.
10
SETTINGS
______________________________________________
Parental lock (block channel positions)
You can block channels which are unsuitable for children.
TV setup
Name
Frequency
Adult lock
1
Select the desired television channel with »P+« or »P-« and
confirm with »OK«.
– The »TV setup« menu appears.
arte
C6 (184MHz)
No
Quality: 68%
2
3
Select »Adult Lock« with »P-« or »P+« and activate it with
»
« or » «.
Ǹ
Ƿ
Select
Press »
Ȅ« (green) to confirm the setting.
Ȅ
● Submit
F
● Back
– The blocked TV station is marked with a key.
Notes:
To switch off parental lock, repeat steps 1 to 3.
The name can not be changed.
The frequency display is designed for your information and
should not be changed.
Creating a list of favourites
You can select your favourite stations and save them in up to four
lists.
Edit channels - TV
1
Select the station with »P+« or »P-« and press »1« – »4« to
enter it into lists of favourites 1 – 4.
List
1
1 Das Erste
2 ZDF
– To remove, press the corresponding number button again.
– You can enter the selected station in more than one favourite
list.
3 SAT1
4 ZDF
5 Doku/KiKa
6 Info/3sat
7 N24
8 ProSieben
9 arte
– You can switch between the station list and your favourites by
pressing »
Ȅ« (green).
1 2 3 4 Select Favourite
Ƿ
Ȅ
● TV
● Move
Finishing the settings
F
Select
● Delete
1
Press »i« to finish the settings.
i
Exit
●
11
SETTINGS
______________________________________________
DVB settings
Selecting the preferred audio language
You can set a preferred language for all channels.
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
DVB Menu
2
Select »Channel settings« with »P+« or »P-« and press »OK«
to confirm.
– The »DVB Menu« appears.
Manual Search
Automatic Search
Reset receiver
Installation
3
Select »Installation« by pressing »P-« or »P+« and press
»OK« to confirm.
– The »Installation« menu appears.
Signal Information
Select
F
4
5
6
Select the »Audio« line with »P-« or »P+«.
● Back
i
Exit
●
Press » « or » « to select the language.
Ǹ
Ƿ
Press »i« to finish the setting.
Selecting the subtitle language
You can select the language for the subtitles.
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »Channel settings« with »P+« or »P-« and press »OK«
to confirm.
– The »DVB Menu« appears.
Installation
3
Select »Installation« by pressing »P-« or »P+« and press
»OK« to confirm.
Audio
English
English
PanScan
ENG
Subtitle
– The »Installation« menu appears.
Adjustment
Region
4
5
6
Select »Subtitle« with »P-« or »P+«.
Select time zone
Automatic
Press » « or » « to select the language.
Select
Ǹ
Ƿ
Press »i« to finish the setting.
F
● Back
i
Exit
●
Select the picture conversion
You can make the following settings:
»None« for an unchanged transmitted picture format.
»PanScan« for wide-screen playback without black bars on the top
and bottom edges of the screen.
»Letterbox« for wide-screen playback with black bars on the top
and bottom edges of the screen.
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »Channel settings« with »P+« or »P-« and press »OK«
to confirm.
12
– The »DVB Menu« appears.
SETTINGS
______________________________________________
3
Select »Installation« by pressing »P-« or »P+« and press
»OK« to confirm.
Installation
Audio
English
English
PanScan
ENG
Subtitle
– The »Installation« menu appears.
Adjustment
Region
4
5
6
Select the »Adjustment« line with »P-« or »P+«.
Select time zone
Automatic
Press » « or » « to select the screen format.
Ǹ
Ƿ
Select
Press »i« to finish the setting.
F
● Back
i
Exit
●
Automatic or manual time zone
You can set the time difference to Greenwich meantime yourself or
let the receiver set it automatically.
1
Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
2
Select »Channel settings« with »P+« or »P-« and press »OK«
to confirm.
– The »DVB Menu« appears.
3
Select »Installation« by pressing »P-« or »P+« and press
»OK« to confirm.
Installation
– The »Installation« menu appears.
Audio
English
English
PanScan
ENG
Subtitle
4
5
Select »Select time zone« with »P-« or »P+«.
Bildformat
Region
Press » « or » « to select »Automatic« or »Manual«.
Ǹ
Ƿ
Select time zone
Time zone
Daylight saving
Manual
GMT +01:00
No
Setting the time zone
Select
You can only set the time zone if the »Manual« option is selected in
the »Set time zone« menu option.
F
● Back
i
Exit
●
1
2
Select »Time zone« with »P-« or »P+«.
Press » « or » « to select your time zone.
Ǹ
Ƿ
Selecting summer time
You can only select summer time if the »Manual« option is selected
in the »Set time zone« menu option.
Installation
Audio
English
English
PanScan
ENG
Subtitle
Bildformat
Region
1
2
Select »Daylight saving« with »P-« or »P+«.
Select time zone
Time zone
Daylight saving
Manual
GMT +01:00
No
Press » « or » « to select »No« or »Yes«.
Ǹ
Ƿ
Select
F
● Back
i
Exit
●
13
______________________________________________
SETTINGS
Picture settings
1
2
3
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Picture
Brightness
Contrast
Colour
Sharpness
Noise Reduction Off
Select »Picture« with »P+« or »P-« and confirm with »OK«.
– The »Picture« menu appears.
Select »Brightness«, »Contrast«, »Colour« or »Sharpness« with
»P+« or »P-« and adjust them with » « or » «.
Ǹ
Ƿ
F
● Back
i
Exit
●
Note:
After a short while the »Picture« menu reappears.
The settings are saved as the »User« picture default setting.
5
Press »i« to finish the settings.
Setting the picture features
You can set the noise suppression of the picture.
You can set the noise suppression to one of four settings: »Low«,
»Medium«, »High« and »Off«.
1
2
3
4
Press »i« to open the »MAIN MENU«.
Picture
Brightness
Contrast
Colour
Sharpness
Noise Reduction Off
– The »MAIN MENU« appears.
Select »Picture« with »P+« or »P-« and confirm with »OK«.
– The »Picture« menu appears.
Select »Noise Reduction« with »P+« or »P-« and set the desi-
F
● Back
red value with » « or » «.
Ǹ
Ƿ
i
Exit
●
Press »i« to finish the settings.
14
______________________________________________
SETTINGS
Audio settings
MAIN MENU
1
Press »i« to open the »MENU«.
– The »MENU« appears.
Sound
Picture
2
Select »Sound« with »P+« or »P-« and confirm with »OK«.
– The »Sound« menu appears.
Preset list
Channel settings
Settings
Note:
Further operation is explained in the following sections.
i
Exit
●
Select
Volume
The standard volume is set here. This is the volume of the device
after switching on.
Sound
Volume
Balance
Sound type
Sound mode
AVL
Dynamic Bass
Equalizer
Headphone
Stereo
Normal
Off
1
Select »Volume« with »P+« or »P-« and adjust the setting with
« or » «.
»
Ǹ
Ƿ
On
Balance
F
● Back
i
Exit
●
1
Select »Balance« with »P+« or »P-« and adjust the setting with
« or » «.
»
Ǹ
Ƿ
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual II «) and the
dubbed version on sound channel A (display: »Dual I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
Sound
Volume
Balance
Sound type
Sound mode
AVL
Stereo
Normal
Off
Dynamic Bass
Equalizer
Headphone
On
1
Select »Sound type« with »P+« or »P-« and adjust the setting
with » « or » «.
Ǹ
Ƿ
F
● Back
i
Exit
●
Stereo width
Widens the audio output for stereo programmes and improves the
sound with mono reception.
1
2
Select »Sound mode« with »P+« or »P-«.
Press » « or » « to select the setting.
Ǹ
Ƿ
15
______________________________________________
SETTINGS
Automatic volume
The television channels broadcast at different volumes. The automa-
tic volume limiting (AVL) function means the volume is kept the same
when you switch between channels.
1
Select »AVL« with »P+« or »P-« and then select »On« with
« or » «.
»
Ǹ
Ƿ
Sound
Volume
Balance
Sound type
Sound mode
AVL
Dynamic bass
You can amplify the bass-effect using this setting.
Stereo
Normal
Off
Dynamic Bass
Equalizer
Headphone
On
1
Select »Dynamic Bass« with »P+« or »P-« and then
select »On« with » « or » «.
Ǹ
Ƿ
F
● Back
i
Exit
●
Equalizer
The equalizer offers you four preset sound settings (Music, Sports,
Cinema and Speech) and two which you can create yourself (User 1
and User 2).
1
Select »Equalizer« by pressing »P+« or »P-« and press »OK«
to confirm.
– The »Equalizer« menu appears.
Equalizer
Music
Sport
Cinema
Speech
User 1
User 2
100 330
Hz Hz KHz KHz KHz
1
3.3 10
2
Select the »User 1« or »User 2« audio setting using »P+« or
»P-« and press »OK« to confirm.
– The »100 Hz« frequency band is activated.
F
● Back
i
Exit
●
Change
3
4
Set the value using »P+« or »P-« and select the next frequency
band by pressing » « or » «.
Ǹ
Ƿ
Press »OK« to save the setting.
Concluding the settings
Press »i« to finish the settings.
1
16
___________________
TELEVISION OPERATION
Basic functions
Switching on and off
1
Switch on the television by pressing the »
vision set.
Ȃ« button on the tele-
– The device switches to standby mode.
Switch the television on with »1…0« or »P+« or »P-«.
PIP
TV-G
z
2
3
Press the »Ǽ« button to switch the television to standby mode.
Press »1…0« or »P+« or »P-« to switch on the device from
standby mode.
Completely switch the television off by pressing »
television set.
Ȃ« on the
– This saves electricity.
Selecting channels
TXT
AV
P
1
Enter single-digit or multi-digit preset channel numbers by
pressing »1 ... 0« on the remote control.
SCAN
S
PAT
– Channels with no stations assigned are ignored.
d
2
Press »P+« or »P-« to move up and down channels.
VCR
DVD
SAT
Selecting AV channel positions
1
Use »AV« to select AV channels directly.
Tele Pilot 162 C
Adjusting the volume
1
Adjust the volume with » « or » «.
Ǹ
Ƿ
Muting
1
Use » « to switch the sound off (mute) and to switch it on
again.
p
Displaying/concealing time
1
You can display or conceal the time by pressing the »
button.
Ȅ«
Selecting stations from lists
You can select stations from various lists (e.g. all stations,
favourites).
1
Press »OK« to open the station list.
– The station list »All programmes« appears.
2
3
Press »P« to switch the station list.
Press »P-« or »P+« to select the station and press »OK« to call
it up.
17
___________________
TELEVISION OPERATION
Picture settings
1
Select the desired picture setting from »User«, »Natural«,
z
»Rich« or »Soft« with »
«.
– You can alter the »User« picture setting, see the ”Picture
settings” chapter on page 14.
Audio settings
F
1
Press » « to select the audio setting »User 1«, »User 2«,
»Music«, »Sports«, »Cinema« or »Speech«.
– You can alter the »User 1« and »User 2« audio setting – see
the “equalizer” chapter on page 16.
Zap function
This function allows you to save the television channel which you
are currently watching and switch to other channels (zapping).
1
Select the channel you want to save in the zap memory with
»1…0« or »P+« »P-«, (e.g. channel 1, BBC 1) and save by
pressing »Z«.
>
– The display »z – P1 BBC1« appears in the screen.
2
3
Change channels with »1…0« or »P+« »P-«.
You can now use »Z« to switch between the saved channel (in
the example, BBC1) and the channel you were watching before.
4
Press »i« to quit the zap function.
– The display disappears.
18
TELEVISION OPERATION
___________________
TV guide
The electrical TV guide offers an overview of all programmes that
will be broadcast in the next week (only for digital stations).
1
2
Press »TV-G« to view the station information.
– Information about the current and following programme
appears.
To show detailed descriptions, press »TV-G« again.
Notes:
Not all stations supply a detailed TV guide.
Many broadcasters supply the daily programme but no
detailed descriptions.
Some broadcasters do not supply any information.
3
4
5
6
Scroll through the station information with »P-« or »P+«.
Select the next programme with » « or » «.
Ǹ
Ƿ
To show an overview of all stations, press »TV-G« again.
Scroll through the station information with »P-«, »P+«, »
«
«
Ǹ
or » «.
Ƿ
7
8
To show an overview of the next week, press »OK« again.
Scroll through the station information with »P-«, »P+«, »
Ǹ
or » «.
Ƿ
9
Press »i« to quit the TV guide.
19
___________________
TELEVISION OPERATION
Changing the picture format
The television automatically switches to the 16:9 format, if this
format is recognised by the Euro-AV socket.
1
Select the picture format with »
format, for example »16:9«, appears on the screen.
– You can choose between the following picture formats:
«. The selected picture
E
»Auto« format
The picture format is automatically switched to »16:9« with 16:9
channels.
For programmes in 4:3 format, the picture automatically fills the
screen.
»4:3« format
For 4:3 programmes, select picture format »4:3«.
»16:9« and »14:9« formats
During programmes in 4:3 format, the picture is stretched horizon-
tally if »16:9« or »14:9« is selected.
The picture geometry is stretched horizontally.
With actual 16:9 signal sources (from a SET-TOP box on the
Euro-AV socket) the picture fills the screen completely and with the
correct geometry.
»Letterbox« format
Letterbox setting is especially suitable for programmes in 16:9
format.
The black borders which are usually at the top and bottom of the
screen are eliminated, 4:3 pictures fill the screen.
The transmitted pictures are enlarged, but are slightly cropped at
the top and bottom. The picture geometry remains unchanged.
»Subtitle 1« and »Subtitle 2« format
If you cannot read the subtitles which appear on the bottom of the
screen (especially during programmes with 4:3 format and if the
»Letterbox« format is selected), then select »Subtitle 1«.
If you are still unable to read the subtitles, select »Subtitle 2«.
20
_______________________________
TELETEXT MODE
TOP text or FLOF text mode
Your television has a teletext memory for 1024 pages.
1
2
Press »TXT« to switch to teletext mode.
You can directly select teletext pages with »1...0«.
Return to the overview page 100 with »i«.
PIP
TV-G
z
Note:
At the bottom of the screen, you will see an information line
consisting of a red, green and, depending on the station,
yellow and blue text field. Your remote control has buttons with
the corresponding colours.
z
3
4
5
6
7
Press »
« (red) to scroll back a page.
Press »
Ȅ
« (green) to scroll to the next page.
TXT
AV
P
Ƿ
Press » « (yellow) to select chapters.
SCAN
S
PAT
F
d
Press » « (blue) to select topics.
VCR
DVD
Press »TXT« to switch off teletext mode.
SAT
Normal text mode
1
Press »TXT« to switch to teletext mode.
Tele Pilot 162 C
2
You can directly select teletext pages with »1...0«.
Return to the overview page 100 with »i«.
3
4
5
Press »P-« to scroll back a page.
Press »P+« to scroll to the next page.
Press »TXT« to switch off teletext mode.
Additional functions
Overriding wait time
1
2
3
Press »P«.
– The television returns to television mode, the teletext page
numbers are displayed in the upper left corner of the screen.
Enter the teletext page number with »1...0«.
– The page number appears in red, when the page is found it
changes to green.
Switch to the teletext page by pressing »P«.
21
_______________________________
TELETEXT MODE
Increasing character size
If you have difficulty reading the text on the screen, you can double
the character size.
1
To enlarge the character size of a teletext page, press »AV«
repeatedly.
PIP
TV-G
z
Page stop
A multiple page may contain several sub-pages, which are automa-
tically scrolled by the transmitting station.
1
2
Stop the sub-pages with »
«.
E
Press »
« to quit the function.
E
TXT
AV
P
Calling up a sub-page directly
SCAN
S
PAT
If the selected teletext page contains further pages, the number
of the current sub-page as well as the total number of pages is
displayed.
d
VCR
DVD
SAT
1
2
3
Call up the sub-pages with »S«.
z
Select the sub-pages with »
« (red) or »Ȅ« (green).
End this sub-page function with »S«.
Tele Pilot 162 C
Double window
With this function the television programme and teletext are dis-
played at the same time.
1
2
Press »PAT«.
– On the left you can see the television programme, on the right
the teletext of the programme.
Press »TXT« to quit the function.
22
______________
CONVENIENCE FUNCTIONS
Freeze-frame
If you wish to view a particular scene for longer, you can freeze the
current programme.
Ƿ
1
2
Press » «.
PIP
TV-G
z
Ƿ
Press » « again to end this function.
Channel scan
You can display 16 channels as freeze-frames with this function.
1
Press »SCAN« to start the channel scan.
– The television programme, which you are currently watching,
and the programmes of the following 15 channels are scan-
ned in intervals and displayed on the screen in succession.
TXT
AV
P
2
3
If you wish to select a specific programme from those on offer,
click on »OK« while the programme is displayed.
SCAN
S
PAT
d
Press »SCAN« to end the channel scan.
VCR
DVD
SAT
Tele Pilot 162 C
23
______________
CONVENIENCE FUNCTIONS
Convenience functions with the »Settings« menu
1
Press »i« to open the »MAIN MENU«.
Settings
Language
Timer
Scart Source
Degauss
Calculator
Game
2
Select »Settings« with »P+« or »P-« and confirm with »OK«.
– The »Settings« menu appears.
TV –> AV2 & AV3
Off
Note:
F
● Back
Further operation is explained in the following sections.
i
Exit
●
Select
Changing the menu language
1
Select »Language« with »P+« or »P-« and confirm with
»OK«.
– The »Language« menu appears.
Language
English
Nederlands
Türkçe
2
3
Select the language with »P+«, »P-« and press »OK« to con-
Deutsch
Francais
Italiano
Español
Portuguesa
Eλληvικα
Dansk
Svenska
Suomi
Norsk
Polski
Pycckꢀꢁ
Magyar
Slovenãina
âe‰tina
firm.
Press »i« to finish the setting.
F
● Back
i
Exit
●
Select
Entering the switch-on and off times
A switch-on and off timer can be set in the »Timer« menu. After this
time has elapsed, the television switches to standby mode or swit-
ches on from standby mode. You can enter the channel with which
the television should switch on in »Program«.
Timer
Date
11.11.2005
08:24
––:––
––:––
––:––
Clock
1
2
Select »Timer« with »P+« or »P-« and confirm with »OK«.
On time
Off time
Alarm time
Program
Select »Date«, »Clock«, »On time«, »Off time«, »Alarm time«
or »Program« with »P+« or »P-«.
P1 ARD
F
0..9
● Back
i
Exit
●
3
4
Enter the switch-on or off time and the channel with »1...0«.
Press »i« to finish the setting.
Switching on the degaussing function
If your television has not been connected to a power supply for a
longer period of time, clouding may occur due to strong magnetic
fields. You can avoid this by briefly switching on the degaussing.
Settings
Language
Timer
Scart Source
Degauss
Calculator
Game
TV –> AV2 & AV3
Off
1
Select »Degauss« with »P+« or »P-« and then select »ON«
with » « or » «.
Ǹ
Ƿ
– The screen is degaussed for a short period of time.
F
● Back
i
Exit
●
Select
2
Press »i« to finish the setting.
24
______________
CONVENIENCE FUNCTIONS
Selecting the Euro-AV (Scart) output
You can select which signal should be output at the Euro-AV sockets
AV 2 and AV 3.
You have the following options:
– The channel, which you are currently viewing
(TV → AV2 and AV3).
– The channel which has been selected last
(TUNER1 → AV2 and AV3).
– The signal of the devices, which are connected to the AV inputs
(AV1, AV2, AV3, AV3-S, AV4, AV4-S → AV2 and AV3).
Settings
Language
Timer
Scart Source
Degauss
Calculator
Game
TV –> AV2 & AV3
Off
1
2
3
Select »Scart Source« with »P+« or »P-«.
F
● Back
i
Exit
●
Select
Press » « or » « to select the option.
Ǹ
Ƿ
Press »i« to finish the setting.
25
_______________
USING EXTERNAL DEVICES
Note:
Do not connect any other equipment while the device is switched on.
Switch off the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected the
external devices and the antenna.
Decoder or satellite receiver
In order for the television to receive encoded programs from a
privately operated station, a decoder is needed.
Connecting a decoder or satellite receiver
L
AV
AV
3
2
AUDIO
OUT
Decoder
PAY-TV
R
AV
1
1
Connect the »AV1« socket on the television set and the appro-
priate socket on the decoder using a EURO-AV cable.
Notes:
A satellite receiver can also be connected to this socket.
If you want to use both a satellite receiver and a decoder, the
decoder must be connected to the satellite receiver.
Using a decoder
1
Switch on the television and the decoder.
2
Select the »AV1« preset channel by pressing »AV« repeatedly
until »AV1« appears on the screen.
S
-V
ID
E
O
V
ID
EO
IN
L
AUDIO IN
R
Headphones
Connecting headphones
1
Insert the headphone jack (3.5 mm ø jack plug) in the head-
phone socket on the television.
Selecting the sound settings for the headphones
Headphone
Volume
Balance
Bass
Treble
Sound Type
1
2
3
Press »i« to open the »MAIN MENU«.
Select »Sound« with »P+« or »P-« and confirm with »OK«
Select »Headphone« with »P+« or »P-« and confirm with
»OK«.
Stereo
F
● Back
i
Exit
●
4
5
Select »Volume«, »Balance«, »Bass«, »Treble« or »Sound Type«
with »P+« or »P-« and set with » « or » «.
Ǹ
Ƿ
26
Press »i« to finish the setting.
_______________
USING EXTERNAL DEVICES
Video recorder, DVD player or SET-TOP box
Connecting the video recorder, DVD player or
SET-TOP box
L
AV
AV
3
2
AUDIO
OUT
R
AV
1
VIDEO OUT
ANTENNA IN
L
110-240 V~
50/60 Hz 35
W
R
OUT
TV DIGITAL AUDIO AUDIO OUT S-VIDEO OUT
OUT
EURO AV
2
DECODER
1
Connect the »AV1«, »AV2« or »AV3« television sockets and
the corresponding sockets of the video recorder, DVD player or
the SET-TOP box with a Euro-AV (Scart) cable.
Using a video recorder, DVD player or SET-TOP box
1
Switch on the video recorder, DVD player or SET-TOP box and
select the function you wish to use.
2
Select the »AV1«, »AV2« or »AV3« channel positions with
»AV«.
– You can hear and see the video and audio information from
the video recorder or the SET-TOP box on the television set.
Notes:
You can connect an external RGB device (DVD player) to the
Euro-AV1 socket. However, you will need to use a fully assigned
Euro-AV cable for this.
You can copy recordings using the television from one external
device to another, by connecting the playback device to Euro-
AV1 and the recording device to Euro-AV2 and then selecting
the »AV1« preset channel. However, you will not be able to
view a television channel.
Connecting the SVHS video recorder
If you own a SVHS video recorder, you can connect it using a
Euro-AV cable to the AV3 socket.
Using a SVHS video recorder
1
Switch on the video recorder and select the function you wish
to use.
2
Select the »AV3-S« preset channel with »AV«.
– You will see the picture and hear the sound of the video
recorder on the television.
27
_______________
USING EXTERNAL DEVICES
Camcorder
Connecting the camcorder
1
Connect the yellow socket (VIDEO – picture signal) on the tele-
vision and the corresponding socket on the camcorder (VHS,
Video 8) with a cinch cable.
R
P
S
-V
ID
E
O
VID
EO
IN
L
AUDIO IN
R
or
Connect the S-VHS socket (S-VIDEO – picture signal) on the
television and the corresponding socket on the camcorder (S-
VHS, Hi 8) with a cinch cable.
2
Connect the white and red sockets (L AUDIO R – sound signal)
on the television and the corresponding sockets of the camcor-
der with a cinch cable.
Note:
If a mono camera is connected, connect the white socket (L)
of the television and the corresponding socket of the camera. Sel-
ect »Mono« in the »Sound« menu during mono operation.
Operating with a camcorder
1
Switch on the camcorder, insert a cassette and start playback.
2
Select the preset channel »AV4« (for VHS, Video 8) or »AV4-S«
(for S-VHS, Hi 8), by pressing »AV« repeatedly until »AV4« or
»AV4-S« appears in the screen.
– You will see the picture and hear the sound of the camcorder
on the television.
HiFi system
Connecting the HiFi system
L
AV
AV
3
2
AUDIO
OUT
R
AV
1
R
L
AUDIO
INPUT
1
Connect the white and red sockets »L R AUDIO OUT« on the
television and the corresponding sockets on the HiFi with a
cinch cable.
28
______________________________
SPECIAL SETTINGS
Tuning analogue television stations
These settings are only necessary if you can not receive digital
stations. The television channel can be set directly or using the
search.
Analogue stations can be stored only on channel positions
900 – 999.
Tuning channels using the search
1
Use »0« – »9« to select station position 900.
2
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
3
Select »Channel settings« with »P+« or »P-« and confirm with
»OK«.
Channel settings
System
Channel
Search
Fine Tune
Program No
Child Lock
Store
Autoprogram
Digital Setup
BG
C 06
< >
00
01
Off
– The »Channel settings« menu appears.
4
5
Select »Program No« with »P+« or »P-« and set the preset
channel with » « or » «.
Ǹ
Ƿ
Select »Search« with »P+« or »P-« and start the search with
« or » «.
F
»
● Back
Ǹ
Ƿ
i
Exit
●
– If a strong station signal is received, the search is interrupted
and the picture appears. Repeat the search until the channel
you want appears on the screen.
Note:
The current system is automatically displayed in the »System«
line. Select »System« with »P+« or »P-« if the colour or sound
are incorrect. Select the setting required with » « or » «.
Channel settings
System
Channel
Search
Fine Tune
Program No
Child Lock
Store
Autoprogram
Digital Setup
BG
C 06
< >
00
01
Off
Ǹ
Ƿ
6
7
Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
Note:
To set other television stations, repeat steps 3 to 5.
F
● Back
i
Exit
●
Press »i« to finish the setting.
29
______________________________
SPECIAL SETTINGS
Fine tuning analogue television stations
The television automatically tunes itself to the best possible recepti-
on. You may need to carry out manual fine tuning in areas where
there is poor reception.
1
Press »i« to open the »MAIN MENU«.
Channel settings
System
Channel
Search
Fine Tune
Program No
Child Lock
Store
Autoprogram
Digital Setup
– The »MAIN MENU« appears.
BG
C 06
< >
00
01
Off
2
Select »Channel settings« with »P+« or »P-« and confirm with
»OK«.
– The »Channel settings« menu appears.
3
4
5
Select »Fine Tune« with »P+« or »P-« and set it with »
«
Ǹ
or » «.
Ƿ
F
● Back
i
Exit
●
Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
Press »i« to finish the setting.
Tuning the analogue television channels by
entering the channel numbers
1
Use »0« – »9« to select station position 900.
2
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
3
4
Select »Channel settings« with »P+« or »P-« and confirm with
»OK«.
Channel settings
System
Channel
Search
Fine Tune
Program No
Child Lock
Store
Autoprogram
Digital Setup
– The »Channel settings« menu appears.
BG
C 06
< >
00
01
Off
Select »Program No« with »P+« or »P-« and set the
channel with » « or » «.
Ǹ
Ƿ
5
6
Select »Channel« with »P+« or »P-« and confirm with »OK«.
Press »OK« to choose between »S« (special channel) and »C«
(channel).
F
0..9
C/S
● Back
i
Exit
●
7
Press » « or » « to switch up and down channels or use
»1…0« to enter the channel number directly.
Ǹ
Ƿ
Note:
The current system is automatically displayed in the »System«
line. Select »System« with »P+« or »P-« if the colour or sound
are incorrect. Select the setting required with » « or » «.
Ǹ
Ƿ
8
9
Select »Store« with »P+« or »P-« and confirm with »OK«.
Note:
To set other television stations, repeat steps 3 to 7.
Press »i« to finish the setting.
30
______________________________
SPECIAL SETTINGS
Re-tuning all analogue television channels
These settings are only necessary if you can not receive any digital
stations or if you want to re-tune all analogue channels (e.g. if you
have moved).
Channel settings
System
Channel
Search
Fine Tune
Program No
Child Lock
Store
Autoprogram
Digital Setup
BG
C 06
< >
00
01
Off
Analogue channels can be stored only on station positions
900 – 999.
1
2
Use »0« – »9« to select station position 900.
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
F
0..9
● Back
i
Exit
●
3
4
5
6
Select »Channel settings« with »P+« or »P-« and confirm with
»OK«.
– The »Channel settings« menu appears.
Select »Program No« with »P+« or »P-« and using » « or
Ǹ
Channel settings
System
Channel
Search
Fine Tune
Program No
Child Lock
Store
»
« enter the channel numbers from the point they should be
BG
Ƿ
C 06
< >
00
01
Off
saved.
Select »Autoprogram« with »P+« or »P-« and confirm with
»OK«.
– The »Country Selection« menu appears.
Autoprogram
Digital Setup
F
Select the country using »P+«, »P-«, » « or » « and confirm
● Back
Ǹ
Ƿ
i
Exit
●
Select
with »OK«.
– The automatic search may last a few minutes, depending on
the number of television channels received.
Note:
You can interrupt the search by pressing »i«.
31
SPECIAL SETTINGS
______________________________
Changing stored channels for analogue stations
You can delete stations that have been stored more than once
during the automatic search. You can also store stations in a
different preset position, change or enter the name of a stations as
well as skip channels.
Deleting stations
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Preset list
2
Select »Preset list« with »P+« or »P-« and press »OK« to con-
v
900 ARD
901 ZDF
902 RTL
903 SAT1
904 PRO7
Ŋ
v
Ŋ
firm.
v
Ŋ
v
– The »Preset list« menu appears.
Ŋ
v
Ŋ
1 2 3 4 Favorite Selection
Move
3
4
Select the channel you wish to delete with »P+« or »P-«.
z
F
● Skip
● Delete
F
Press » « (blue) to prepare the channel for deletion and press
Ƿ
Ȅ
● Lock
● Name
i
● Exit
»OK« to delete.
Sorting television stations
1
In the »Preset list« menu, select the station to be moved by
pressing »P+« or »P-«.
Preset list
v
900 ARD
901 ZDF
902 RTL
903 SAT1
904 PRO7
Ŋ
v
Ŋ
2
3
Highlight the channel with »OK«.
v
Ŋ
v
Ŋ
v
Ŋ
Select a new station with »P+« or »P-« and then press »OK«
to confirm.
Move
– All of the stations that follow move up one position.
i
● Exit
Note:
To sort the other television channels, repeat steps 1 to 3.
Entering station names (maximum of 5 characters)
1
2
3
In the »Preset list« menu, select the station with »P+« or »P-«.
Preset list
v
900 ARD
901 ZDF
902 RTL
903 SAT1
904 PRO7
Ŋ
Ƿ
Highlight the channel with » « (yellow).
v
Ŋ
v
Ŋ
v
Ŋ
Select letters or numbers with »P+« or »P-«, move to the next
v
Ŋ
position with » « or » « and repeat.
Ǹ
Ƿ
Ƿ
4
Store the channel name with » « (yellow).
Ƿ
● Name
i
● Exit
Note:
To enter more station names, repeat steps 1 to 4.
32
SPECIAL SETTINGS
______________________________
Skipping television stations
You can mark television stations to be skipped during selection with
»P+« or »P-«. You can still select the station using the numerical
buttons.
Preset list
v
900 ARD
901 ZDF
902 RTL
903 SAT1
904 PRO7
Ŋ
v
Ŋ
v
Ŋ
v
Ŋ
v
1
2
In the »Preset list« menu, select the station with »P+« or »P-«.
Ŋ
1 2 3 4 Favorite Selection
Move
z
Highlight the channel with »
« (red).
z
F
Ƿ
● Skip
● Delete
– The station is now displayed on a red background.
Ȅ
● Lock
● Name
i
● Exit
– You can deselect the station by pressing the red button again.
Parental lock (block channel positions)
Preset list
You can block channels which are unsuitable for children.
v
900 ARD
901 ZDF
902 RTL
903 SAT1
904 PRO7
Ŋ
v
Ŋv
1
2
Select the desired television channel with »P+« or »P-«.
To block the channel, press » « (green).
v
Ŋ
v
Ŋ
v
Ȅ
Ŋ
1 2 3 4 Favorite Selection
Move
– The blocked TV station is marked with a key.
z
F
Ƿ
● Skip
● Delete
Notes:
Ȅ
● Lock
● Name
i
● Exit
You can unlock the station by pressing the green button again.
Creating a list of favourites
You can select your favourite stations and save them in up to four
lists.
Preset list
v
900 ARD
901 ZDF
902 RTL
903 SAT1
904 PRO7
Ŋ
v
Ŋ Fav. 1
v
Ŋ
1
Select the station with »P+« or »P-« and press »1« – »4« to
enter it into lists of favourites 1 – 4.
v
Ŋ
v
Ŋ
1 2 3 4 Favorite Selection
Move
– To remove, press the corresponding number button again.
– You can enter the selected station in more than one favourite
list.
z
F
Ƿ
● Skip
● Delete
Ȅ
● Lock
● Name
i
● Exit
Finishing the settings
1
Press »i« to finish the settings.
33
SPECIAL SETTINGS
______________________________
Tuning digital television stations
This setting is only necessary if a new channel comes on air and you
do not want to change the order of your channels. The television
channel can be set directly or using the search.
Tuning channels using the search
1
Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
DVB Menu
2
Select »Channel settings« with »P+« or »P-« and press »OK«
to confirm.
– The »DVB Menu« appears.
Manual Search
Automatic Search
Reset receiver
Installation
3
Select »Automatic Search« with »P+« or »P-« and press
»OK« to confirm.
Signal Information
Select
– The »Channel search - Digital« menu appears and the search
begins. The automatic search may last several minutes
depending on the number of television channels received.
F
● Back
i
Exit
●
– The search is finished when the message »Done« appears.
– At the end of the search, new TV or radio stations are auto-
matically added to the end of the station list.
4
5
Press »Ȅ« (green) to quit the station search.
– The »DVB Menu« appears.
Press »i« to finish the setting.
Tuning the television channels by entering the
channel numbers
1
Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
DVB Menu
2
Select »Channel settings« with »P+« or »P-« and press »OK«
to confirm.
– The »DVB Menu« appears.
Manual Search
Automatic Search
Reset receiver
Installation
3
Select »Manual Search« using »P+« or »P-« and press »OK«
to confirm.
Signal Information
The »Manual Search« menu appears.
Select
F
● Back
i
Exit
●
34
SPECIAL SETTINGS
______________________________
4
Press » « or » « to select the channel number and press
»OK« to confirm.
Ǹ
Ƿ
– The »Channel search - Digital« menu appears and the search
begins.
– The search is finished when the message »Done« appears.
– At the end of the search, new TV or radio stations are
automatically added to the end of the station list.
5
6
Press »Ȅ« (green) to quit the station search.
– The »DVB Menu« appears.
Press »i« to finish the setting.
Resetting the DVB receiver to its original state
This function enables you to delete the station lists and all custom
settings.
1
Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
DVB Menu
2
Select »Channel settings« with »P+« or »P-« and press »OK«
to confirm.
– The »DVB Menu« appears.
Manual Search
Automatic Search
Reset receiver
Installation
3
4
Select »Reset receiver« with »P-« or »P+« and press »OK« to
confirm.
Signal Information
Select
Use »0« – »9« to enter the password 1234 and confirm with
»Ȅ«.
F
● Back
i
Exit
●
– The »DVB Menu« appears.
5
Select »Automatic Search« with »P+« or »P-« and press
»OK« to confirm.
– The »Channel search - Digital« menu appears and the search
begins. The automatic search may last several minutes
depending on the number of television channels received.
– The search is finished when the message »Done« appears.
6
7
Press »Ȅ« (green) to quit the station search.
– The »DVB Menu« appears.
Press »i« to finish the setting.
35
_____________________________________
INFORMATION
Displaying digital station reception properties
1
Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
DVB Menu
2
Select »Channel settings« with »P+« or »P-« and press »OK«
to confirm.
– The »DVB Menu« appears.
Manual Search
Automatic Search
Reset receiver
Installation
3
Select »Signal Information« with »P-« or »P+« and press
»OK« to confirm.
Signal Information
Select
Notes:
F
The lower section of the menu shows the signal properties. The
further the bar for »Quality« and »Signal Strength« extends to
the right, the better the reception signal.
● Back
i
Exit
●
The signal level not only depends on the settings of your
receiver unit, but also on the channel which is currently active.
Remember this when aligning your antenna using the signal
level display.
4
Press »i« to quit the menu.
36
_____________________________________
INFORMATION
Technical data
Mains voltage:
230 V, 50/60 Hz
Power consumption: In standby mode 4.5 W
Switched on 115 W
Sound output:
2x25 Watts music
Reception ranges:
C01 ... C99, special channels S01 ... S41,
frequency band 1 ... 4
Channel positions: 100 analog, 899 digital and 5 AV
Service information for dealers:
The product complies with the following EU directives:
73/23/EEC directive for electrical equipment to be used within
defined voltage ranges. 89/336/EEC directive on electromagnetic
compatibility.
The television set complies with the following standards: EN 60065,
EN 55013, EN 55020
Environmental note
This product has been made from high-quality parts and materials
which can be re-used and recycled.
Therefore, do not throw the product away with normal household
waste at the end of its life. Take it to a collection point for recycling
electrical and electronic devices. This is indicated by this symbol on
the product, in the operating manual and on the packaging.
Please find out about collection points operated by your local
authority.
Help protect the environment by recycling used products.
37
Subject to alteration and correction!
_____________________________________
INFORMATION
Troubleshooting
If the remedies given below do not work, please consult an authori-
sed GRUNDIG dealer. Please bear in mind that malfunctions can
also be caused by external devices such as video recorders or satel-
lite receivers.
Fault
Possible cause
Remedy
Screen lit (snow), but no
station
Antenna cable
Is the antenna cable
connected?
No television station pro-
grammed
Start the station search
Poor picture contrast
Picture settings incorrectly Adjust the brightness,
set
contrast or colour setting
Test with another channel
Problem at station
Interference to picture
and/or sound
Interference from other
devices
Change the position of the
device
Ghosts, reflection
Channel setting
Automatic or manual chan-
nel setting/fine tuning
Antenna
Have antenna cable or
system checked
No colour
Colour intensity at minimum Turn up the colour
TV standard setting (if Select the correct colour
setting option is available) standard
Problem at station
Test with another channel
Inappropriate colour,
colour spots
Strong magnetic field due, Move the loudspeakers
for example, to loudspea- away from the television.
kers
If colour spots remain,
switch off the television set
at the mains and switch on
again after 10 minutes
Volume set to minimum
Turn up or switch on the
volume
Picture but no sound
Problem at station
Test with another channel
Test another channel for
Television station (has no
teletext) or antenna system fine tuning and ghosts
Teletext missing or faulty
Station signal too weak
No optical connection
Check the antenna system
Point the remote control at
the television set
Remote control does not
work
Remote control batteries
Check the batteries, change
if necessary
Operating condition unde- Switch off the television
fined
with the main power button
for approximately
2 minutes
Parental lock has been
activated
Switch off the parental lock
The picture is unrecognisa-
ble after switching on the
television
38
_____________________________________
INFORMATION
Additional Information for units sold in the UK.
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains
supply.
The range of multi-system receivers is built to work in most European coun-
tries. However, the mains plug and socket system for the UK differs from
many European countries.
This appliance has been supplied with a fitted, non-removable, approved
converter plug for use in the UK. This converter plug is fitted with a 5A rated
fuse.
In case this appliance is supplied with a moulded 2-pin Euro plug only,
which is unsuitable for UK operation, this must be cut off and immediately
disposed of. An approved 13A, 3-pin UK plug should then be fitted by a
qualified electrician.
Note:
The severed Euro plug must be destroyed to avoid a possible shock
hazard should it be inserted into a socket elsewhere.
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is
used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any
other type of plug is used it must be protected by a 5A fuse either in the
plug, or at the distribution board. If this type of plug becomes defective,
ensure that the fuse is removed before disposal, to eliminate potential shock
hazard.
If it is necessary to change the fuse in the non-rewireable plug, the correct
type and rating (5A ASTA or BSI approved BS1362) must be used and the
fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and
plug must not be used until a replacement is obtained. Replacement fuse
covers should be obtained from your dealer.
Important:
The wires in the mains lead are colour coded in accordance with the follo-
wing code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not cor-
respond with the coloured marking identifying terminals in your plug, pro-
ceed as follows:
Connect the BLUE coloured wire to plug terminal marked with the letter “N”
or coloured black.
Connect the BROWN coloured wire to the plug terminal marked with the let-
ter “L” or coloured red.
In no circumstance must any of the wires be connected to the terminal mar-
ked with the letter “E”, earth symbol “z”, coloured green, or green & yel-
low.
39
Grundig Multimedia B.V. • Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam •
|